Desna Products
- Controls
- Scales
- Packaging
Technology - Case Studies:
Scales/Control Systems/Automation - Case Studies:
Packaging Technology - Desna Services
----------------------
Accreditations
Registered supplier with Electronics Recycling Alberta
Member of the Datamax Valued Partner Program
----------------------
Keyera Energy:
Bolt Tension Monitoring System
Problem:
Keyera Energy was having problem maintaining their compressors because of breakdown of bolts due to tension. They needed a monitoring system to indicate when the system should stop compressor for avoiding breakdown.
Solution:
The control system reads signal from eight (8)-strain gauge based transducer bolts. The minimum load is 0 lbs and max is 16000 lbs. These scale weight values are translated into analog output current (4-20mA). 0 lb corresponds to 4 mA and 16000 lbs correspond to 20 mA. The analog output current for each bolt is sent to a PLC system for shutting down the compressor if the bolts are under alarm condition. The alarm values are to be determined by the PLC system, based on the current value (4-20 mA).
This unit displays an alarm for each bolt on screen if the actual weight exceeds the user entered critical Setpoint value.
- Schlumberger Canada Ltd. - Bulk Plant Automation and Chemical Dosing System
- Enmax Corporation - Touch Screen Weighing System
- Canada Olympic Park - Integrated Ski Jump Weighing System
- Keyera Energy - Bolt Tension Monitoring System
- BPB - Mud Filling Station
- Standens - Quality Control Spring Testing Rig